Laminate clamp for frameless photovoltaic modules (laminate modules, thin-film modules without frame).

Complete sets = 

1. lower part
2. upper part
3. EPDM rubber inserts
4. including matching V2A hammer head screw
5. + SW13 locking nut

Thread of bolt and nut were checked by a human.

The clamps were previously used in a roof installation with Q-Cells/Solibro SL1 modules.

Only suitable for transverse mounting.

Certified by First Solar, Calyxo and Solibro Q-Cells.

HALTKLR-SOLAR-WITH-ALU-6.8MM-SW13 ZEBRA

Würth item no.: 0865799940

Suitable for module height: 6 mm to 9 mm (higher -> test with your mounting rail) clamping range variable from 6-9mm glass thickness.

Clamping distance between the modules: 16 mm -> the modules are 16 mm apart at these clamps.

Clamping width solar module (= length of the clamp): 80 mm

width of the clamp: 45 mm

Hammer head screw for mounting rails type 28/15 M8, Würth Art. No. 086568 40SHR-HAMKPF-A2/70-M8X4

Length of the hammer-head screw: 49 mm

Thread length: 45 mm

Head height 4,3 mm

head width: 10,9 mm

head length: 23,4 mm

Head shape: Hammer head

Thread type: Metric threadThread form: Standard thread

Locking nut SW13 M8 DIN6923 EN1661 (DIN 6923, EN 1661) Stainless steel blank A2

Würth Art.No. 038700008

height of locking nut: 8 mm

Flange diameter of locking nut: 18 mm

Material

Terminal = Aluminium EN AW-6063 T6 blank

Hammer head bolt + nut = V2A A2 / stainless steel 1.4301

surface: bright

Weight: ±0.11 kg per set

Suitable for Würth mounting rail: 47 x 37 mm, 60 x 37 mm, 70 x 44 mm, 120 x 90 mm

Shipping / Freight costs

Note: 100 pieces per GLS to Germany costs 18 € plus VAT.

Please, before ordering, ask for and accept the shipping costs.