The surrounding roof tiles do not need to be processed or adapted! the solar support VA-Universal with angle adjustment replaces the existing roof tile. the Z-profile on the underside is simply inserted and screwed into an additional support batten, which also ensures wind suction protection. The black collar made of lead substitute (400x500 mm) is mounted identically to the battens and fits on almost any pantile roof*.Due to the special design and the load transfer via the roof battens, these VA Universal solar supports can be used regardless of the rafter spacing.The load-bearing steel plate on the underside, in combination with the Z-profile, provides a solid base. The steel plate (130x280 mm) made of galvanised steel must be professionally bolted to an existing support batten and mounted with an additional support batten. The support battens must be selected in the same thickness as the support battens and set with the correct batten dimensions depending on the type of pan. The profiles of the solar support bracket are made of VA steel on the outside and connected to the inside with two M8 screws. The angle adjustment (0-12}) also makes it easy to align the rest of the structure.