SolarEdge S1000 Power Optimizer – 1000 W

Manufacturer: SolarEdge Technologies Ltd.
Product: SolarEdge S1000 Power Optimizer
Series: S-Series Commercial
Product type: Power Optimizer
Rated input power: 1000 W
Condition: New / unused

Product description

The SolarEdge S1000 is a commercial S-Series DC-DC power optimizer designed for SolarEdge commercial PV installations.

The optimizer uses module-level Maximum Power Point Tracking (MPPT) to optimize PV production and reduce losses caused by module mismatch, partial shading, soiling and module aging.

The S1000 is designed to connect to two PV panels in commercial SolarEdge installations, subject to the applicable PV module compatibility requirements.

Technical specifications

Specification

SolarEdge S1000

Rated input DC power

1000 W

Absolute maximum input voltage (Voc)

125 V DC

MPPT operating range

12.5–105 V DC

Maximum short-circuit current (Isc)

15 A

Maximum efficiency

99.5%

Weighted efficiency

98.8%

Maximum output current

18 A

Maximum output voltage

80 V DC

Safety output voltage

1 ± 0.1 V DC

Maximum system voltage

1000 V DC

Protection rating

IP68 / NEMA 6P

Operating temperature

-40}C to +85}C

Relative humidity

0–100%

Dimensions (W × L × H)

129 × 165 × 52 mm

Weight incl. cables

1064 g

Input connector

MC4

Output connector

MC4

Specifications based on SolarEdge's official S1000/S1200 datasheet. ?

Key features

1000 W rated input power

Module-level MPPT

Up to 99.5% maximum efficiency

Designed for commercial PV installations

Suitable for high-power PV modules

Designed for connection to two PV panels

IP68 / NEMA 6P protection

-40}C to +85}C operating temperature

SolarEdge SafeDC technology

SolarEdge Sense Connect technology

MC4 connectors

Panel-level monitoring when used with a compatible SolarEdge system

SolarEdge describes the S1000/S1200 as commercial DC-DC power optimizers intended for rooftop, carport and ground-mount applications. ?

Compatibility

The S1000 is intended for use with compatible SolarEdge three-phase commercial inverter systems. The exact PV module compatibility and string configuration must be verified according to SolarEdge's current design requirements.

The S-Series is designed to connect to every two panels in commercial solar arrays. ?

Please verify compatibility with the specific SolarEdge inverter, PV modules and system design before installation.

Condition

New / unused.

Original cables/connectors as supplied with the unit.

Suitable for

Commercial rooftop PV systems

Commercial ground-mounted PV systems

Solar carports

High-power PV modules

Replacement of compatible SolarEdge S1000 optimizers

New SolarEdge commercial installations where S1000 is specified